One of our Powerstroke 6.0 Remanufactured Diesel Engines

6.0 Powerstroke diesel engines

$3,295.00 – $5,195.00

(Interchangeable with the 6.0 International VT 365)

Properly re-manufactured with new parts.  All 6.0 Long Blocks come standard with ARP head studs.  Use the drop down list to select year model and any available upgrades that you might want.

We HIGHLY RECOMMEND that you purchase Driven Break-In oil with your engine.  It is the only diesel specific break in oil on the market. It can be purchased on our web site for $119.00 for 4 gallons and can be shipped at NO EXTRA CHARGE  with your re-manufactured engine.

You MUST SELECT appropriate MODEL YEAR and appropriate CORE CHARGE from the drop down list below.

Clear

Refundable Core Deposit (Must select appropriate one)

Core Deposit covers the cost of the CORE ENGINE AND THE SHIPPING CRATE. (Must be returned within 60 days.) FREE SHIPPING on core return if paid in full at the time you place the order. Missing engine parts or parts that are unusable may be deducted from the deposit.

Early 2003 – Production date 9/29/03 and earlier

Engine has the round injector oil rails with the braided lines to it and the stand pipes are threaded at the bottom

Late 2003- Production date 10/03 through 2004 Model Year

Engine has wide/web style injector oil rails with push in stand pipes and the dogleg style branch tube to connect to the HPOP

2005 through 2010 Model years

Webbed style injector oil rails, branch tube with rectangular block in center and the latest style HPOP.

2005 Excursion

Ford used 2 different style of Branch Tubes on the 2005 Excursions. We will contact you to find out which one you need if you click this box.

BREAK-IN OIL – “DRIVEN” DBR 15W-40

4 GALLONS.  This is the ONLY DIESEL SPECIFIC BREAK-IN OIL ON THE MARKET and is recommended for use in our re-manufactured diesel engines.  Promotes proper surface mating during the critical break-in process and chemically assists with piston ring sealing in high-performance and turbocharged diesel engines.
* Shipped with engine with no additional shipping charges.

STAGE 2 CAMSHAFT

#1 most recommended upgrade by our customers who have purchased one.
Manufactured to our own specifications, an Asheville Engine stage 2 camshaft provides a smoother transition and less stress for the valves, spools the turbo quicker, drops the EGT’s, adds approximately 45 HP and can provide better fuel mileage.

O-RINGED CYLINDER HEADS

These heads also have a special high performance valve cut which allows up to 30% more airflow. O-ringed heads allow for a better head-to-block combustion seal helping to avoid the problem of blown head gaskets. (Long block only)

HIGH REV VALVE TRAIN UPGRADE

Includes a high rev valve spring set with retainers and thick walled heavy duty Chromoly push rods. For use in high rev applications up to 5,000 RPMs. When matched with the Asheville Engine Stage 2 Camshaft you can expect a smooth power curve. (Long block only)

BALANCED ROTATING ASSEMBLY

We offer this option as an upgrade for those people who want a perfectly balanced engine. If you don’t understand the “balancing” and would like to learn why you might, or might not want it done, scroll to the bottom of this page and click on our blog “Balancing a Powerstroke diesel engine”.
Keep in mind that we own a $35,000 balancing machine and we make money balancing an engine but we will not lie to you to tell you that it is necessary. Most shops charge a lot more to do one but we keep the cost to a minimum for those people who want it done. If we were building a Nascar engine that runs at 9,800 RPM, we would tell you that it has to be done.

POLYDYN PERFORMANCE CERAMIC PISTON COATING

PolyDyn HS ceramic piston coating protects and insulates to maintain structural integrity and to reduce potential engine failure. The HS’s extreme heat insulating polymers reduce heat saturation into the piston, which maintains more heat in the combustion chamber. This allows more fuel and less timing, thus building more power.
For more information, click on this link http://www.polydyn.com/pistons

POLYDYN DL BEARING COATING

PolyDyn DL is specifically designed to permeate the bearing surface, increasing oil retention to protect against intense heat and extreme pressure. This dramatically reduces bearing wear and flaking, and adds an extra level of lubricant to the bearing. This also protects the bearing from heat build up and excessive wear.
For more information, click on this link http://www.polydyn.com/bearings

WAGLER CONNECTING RODS

The choice of brand is up to you but we recommend Wagler because we don’t have to clearance the block for installation. Billet connecting rods are recommended for applications in which you plan to build an engine capable of exceeding 650 horsepower.

CARILLO CONNECTING RODS

Probably the most well-known brand of billet connecting rods. Billet connecting rods are recommended in high horsepower applications over 650 horsepower.

ARP CUSTOM AGE 625+ HEAD STUDS (Upgrade to Long block)

All Custom Age 625+ studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 270,000 psi. These fasteners deliver a 40% increase in tensile strength over the OEM Torque to Yield (TTY) head bolts.

FORD OEM HEAD GASKETS

SKU: N/A Categories: , Tags: , , , , ,

Description

Short Block – Properly machined engine block with balanced crankshaft, connecting rods and pistons.  Remanufactured to exact specifications using brand new parts, including Mahle/Clevite pistons with rings, main bearings, rod bearings, cam bearings, and lifters.     Usually ships in 1 to 2 days * Please make sure that you add the $900. core deposit.  Deposit is for the core engine and the shipping crate and is refundable.

Long Block – Same as above including properly machined cylinder heads with the correct injector clamps, rocker boxes and complete valve train including updated pushrods.  Every 6.0 Long block is assembled with ARP Head Studs.  Usually ships in 1 to 4 days.  * Please make sure that you add the $1,200. core deposit.  Deposit is for the core engine and the shipping crate and is refundable.

We do not included manifolds, fuel system components, oil pan, covers or any electrical components with our 6.0 Powerstroke engines.

Additional information

Engine Block

Short Block, Long Block

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Related products