Manton Push Rods – Heavy Duty 4130 Chromoly – 6.0/6.4 Powerstroke

Description

Manton Push Rods. Heavy Duty 4130 Chromoly push rods for 6.0 Powerstroke diesel engines.

They can be used as stock replacements as well as for higher performance applications. – FREE SHIPPING to the United States.  WE HAVE THESE IN STOCK.

Why change pushrods?

If you are tuning your engine for a higher horsepower, higher RPM application.  Manton push rods will handle the additional stress a lot better than stock push rods.  Even if you aren’t trying to get more performance out of your engine, the original push rod in a 6.0 Powerstroke was too long, and caused undue stress on the lifters.

Need Lifters?

Lifter failure is quite common in 6.0 Powerstroke engines, especially after bulletproofing.  As long as you have the heads off, you should also put new lifters in it.  Unfortunately, to change all of the lifters, you need to pull the rear cover off the engine which adds a lot of additional work.  Because we’ve found that about 70% of lifter failures occur in the front half of the engine, you should at least replace the lifters in the front 4 cylinders.   You can purchase a set of lifters at this link. https://ashevilleengine.com/product/powerstroke-oem-roller-lifters-for-7-3-6-0-and-6-4-powerstroke-16-piece-set-free-shipping/

If you’d like to purchase just a half set, we would be more than happy to take that order but half sets are not listed on our web site.  Please send an email request to AshevilleEngine@aol.com to purchase a half set and we will contact you for payment.