6.0 Powerstroke diesel engines

$2,995.00$4,995.00

(Interchangeable with the 6.0 International VT 365)

Properly re-manufactured with new parts.  All 6.0 Long Blocks come standard with ARP head studs.  Use the drop down list to select year model and any available upgrades that you might want.

We HIGHLY RECOMMEND that you purchase Driven Break-In oil with your engine.  It is the only diesel specific break in oil on the market. It can be purchased on our web site for $119.00 for 4 gallons and can be shipped at NO EXTRA CHARGE  with your re-manufactured engine.

You MUST SELECT appropriate MODEL YEAR and appropriate CORE CHARGE from the drop down list below.

Clear

Refundable Core Deposit (Must select appropriate one) * 

Core Deposit covers the cost of the CORE ENGINE AND THE SHIPPING CRATE. (Must be returned within 60 days.) FREE SHIPPING on core return if paid in full at the time you place the order. Missing engine parts or parts that are unusable may be deducted from the deposit.

BREAK-IN OIL – “DRIVEN” DBR 15W-40

4 GALLONS.  This is the ONLY DIESEL SPECIFIC BREAK-IN OIL ON THE MARKET and is recommended for use in our re-manufactured diesel engines.  Promotes proper surface mating during the critical break-in process and chemically assists with piston ring sealing in high-performance and turbocharged diesel engines.
* Shipped with engine with no additional shipping charges.

STAGE 2 CAMSHAFT

#1 most recommended upgrade by our customers who have purchased one.
Manufactured to our own specifications, an Asheville Engine stage 2 camshaft provides a smoother transition and less stress for the valves, spools the turbo quicker, drops the EGT’s, adds approximately 45 HP and can provide better fuel mileage.

O-RINGED CYLINDER HEADS

These heads also have a special high performance valve cut which allows up to 30% more airflow. O-ringed heads allow for a better head-to-block combustion seal helping to avoid the problem of blown head gaskets. (Long block only)

SHORT BLOCK gasket set

SHORT BLOCK gasket set comes with every gasket and seal needed to install an Asheville Engine SHORT BLOCK, including head gaskets. (Price shipped with engine)
Mahle / Victor Reinz is the largest manufacturer of gaskets in the world today, manufacturing gaskets for virtually every engine manufacturer producing engines worldwide. With the best coverage on the planet, the Victor Reinz product offering covers over one million applications worldwide, including the Ford Motor Company.

LONG BLOCK gasket set

LONG BLOCK gasket set comes with every gasket and seal needed to install an Asheville Engine LONG BLOCK. (Price shipped with engine)
(Does not included head gaskets, head gaskets are already installed in long block).
Mahle / Victor Reinz is the largest manufacturer of gaskets in the world today, producing gaskets for virtually every engine manufacturer producing engines worldwide, including the Ford Motor Company.

HIGH REV VALVE TRAIN UPGRADE

Includes a high rev valve spring set with retainers and thick walled heavy duty Chromoly push rods. For use in high rev applications up to 5,000 RPMs. When matched with the Asheville Engine Stage 2 Camshaft you can expect a smooth power curve. (Long block only)

BALANCED ROTATING ASSEMBLY

We offer this option as an upgrade for those people who want a perfectly balanced engine. If you don’t understand the “balancing” and would like to learn why you might, or might not want it done, scroll to the bottom of this page and click on our blog “Balancing a Powerstroke diesel engine”.
Keep in mind that we own a $35,000 balancing machine and we make money balancing an engine but we will not lie to you to tell you that it is necessary. Most shops charge a lot more to do one but we keep the cost to a minimum for those people who want it done. If we were building a Nascar engine that runs at 9,800 RPM, we would tell you that it has to be done.

POLYDYN PERFORMANCE CERAMIC PISTON COATING

PolyDyn HS ceramic piston coating protects and insulates to maintain structural integrity and to reduce potential engine failure. The HS’s extreme heat insulating polymers reduce heat saturation into the piston, which maintains more heat in the combustion chamber. This allows more fuel and less timing, thus building more power.
For more information, click on this link http://www.polydyn.com/pistons

POLYDYN DL BEARING COATING

PolyDyn DL is specifically designed to permeate the bearing surface, increasing oil retention to protect against intense heat and extreme pressure. This dramatically reduces bearing wear and flaking, and adds an extra level of lubricant to the bearing. This also protects the bearing from heat build up and excessive wear.
For more information, click on this link http://www.polydyn.com/bearings

WAGLER CONNECTING RODS

The choice of brand is up to you but we recommend Wagler because we don’t have to clearance the block for installation. Billet connecting rods are recommended for applications in which you plan to build an engine capable of exceeding 650 horsepower.

CARILLO CONNECTING RODS

Probably the most well-known brand of billet connecting rods. Billet connecting rods are recommended in high horsepower applications over 650 horsepower.

ARP CUSTOM AGE 625+ HEAD STUDS (Upgrade to Long block)

This is the cost of upgrading these parts over the standard 250-4202 ARP studs used in our long block.. The retail price to purchase is higher and can be found under “Products” on our web site.
All Custom Age 625+ studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 270,000 psi. These fasteners deliver a 40% increase in tensile strength over the OEM Torque to Yield (TTY) head bolts.

FORD OEM HEAD GASKETS

Description

Short Block – Properly machined engine block with balanced crankshaft, connecting rods and pistons.  Remanufactured to exact specifications using brand new parts, including Mahle/Clevite pistons with rings, main bearings, rod bearings, cam bearings, and lifters.     Usually ships in 1 to 2 days

* Please make sure that you add the $900. core deposit.  Deposit is for the core engine and the shipping crate and is refundable.

Long Block – Same as above including properly machined cylinder heads with the correct injector clamps, rocker boxes and complete valve train including updated pushrods.  Every 6.0 Long block is assembled with ARP Head Studs.  Usually ships in 1 to 4 days.  

* Please make sure that you add the $1,200. core deposit.  Deposit is for the core engine and the shipping crate and is refundable.

We do not included manifolds, fuel system components, oil pan, covers or any electrical components with our 6.0 Powerstroke engines.

Additional information

Engine Block

Short Block, Long Block

Model Year

Early 2003 (9/29 and earlier), Late 2003 – 2004, 2005 – 2010, 2005 Excursion

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…