Stage 2 camshaft – 6.0 & 6.4 Powerstroke engines

Asheville Engine, Inc.  is the leading independent Ford Powerstroke engine builder in the United States.  We have two different Stage 2 camshaft offerings for the 6.0 and the 6.4 Powerstroke engines.

During our years in business, we designed our own Stage 2 camshaft. Our custom built Billet Stage 2 camshaft lowers EGTs, spools the turbo quicker and increases fuel efficiency.  Because of it’s design, it also adds approximately 45 additional horsepower to a 6.0 Powerstroke.  It is also much gentler on the valve train than a stock cam.  We’ve installed approximately 800 of these Stage 2 camshafts over the past three years and every customer loves them. What they love most is getting more performance and more miles per gallon!

We sell our Asheville Engine Stage 2 cam for $800.00 which includes sales tax and shipping to anywhere in the continental U.S.

Stage 2 camshaft from Asheville Engine, Inc.

Wanting more performance?

A step up from our own Stage 2 camshaft on a performance level is the Straub Technologies Stage 2 cam.  Although this cam is very similar to the Asheville Engine Stage 2 but Straub Technologies changed the lobe separation to get a little bit more performance.  As a result, Straub cam is best for use in racing where a small percentage can make the difference between winning and coming in third.  Comparatively, it’s not worth the extra money if you don’t care about going a tenth of a second quicker in 1/4 mile.  Asheville Engine retails this Straub Technologies Stage 2 cam for $995.00 shipped.

Doing your own engine build?

Both our Asheville Engine Stage 2 camshaft and the Straub cam can be purchased on our website. If you are going to be building your own engine or just replacing your camshaft, we have the parts you need.  We have OEM lifters, Manton 4130 Chromoly pushrods, https://arp-bolts.com/  and gaskets, as well as complete rebuild kits.

Please visit the Asheville Engine web site and click on our products to see these and more great products from Asheville Engine, Inc.

We Keep You Strokin’

Asheville Engine, Inc.

Asheville Engine is the leading independent Powerstroke engine builder in the world, powering trucks in Guatemala, Switzerland, Australia, Iceland, Denmark and other countries around the world. We are serious about our business and keep enough inventory IN STOCK to build 50 to 100 Powerstroke engines so our lead time is generally only 1 to 3 days.

4 Comments

  1. Jordan rocca on May 15, 2020 at 6:14 am

    Looking for some help building my 6.4
    Give me a call
    705-561-6576
    Thanks
    Ontario, Canada



    • Asheville Engine, Inc. on May 18, 2020 at 1:29 pm

      If you are looking for somebody to build an engine for you, you can find information and pricing on our web site at http://www.AshevilleEngine.com. Once you have an idea of what we offer, feel free to give us a call. If you are building your own engine and are looking for free advise and help with it, you might want to check on YouTube because we are really busy helping our customers and trying to get orders out the door in a timely manner.



  2. Kenneth Kauffman on February 18, 2022 at 5:02 pm

    Do you put the stage 2 cam shaft and springs and pushrods in your 6.4 long block



    • Asheville Engine, Inc. on February 18, 2022 at 7:42 pm

      The stage 2 cam and high rev 120# valve springs are available as an upgrade to the Asheville Engine Short Block and Long Block engines for $1330.00. There is a check box under where you put your VIN number when ordering.